Notice: Please do not upgrade satonic display with other company's software, it maybe cause your screen damaged, can not display, dark or blue screen, etc. SATONIC WILL NOT WARRANTY BECAUSE OF FAKE SOFTWARE UPGRADE. if you have any questions with your display or other satonic products, please contact with SATONIC before upgrade, SIMILAR IS NOT SAME, please make sure that you buy origional SATONIC products and upgrade with orgional SATONIC Software.
You could save the page or follow us on Youtube Channel 
, and see our latest software and the latest products.
Installation Manual: https://drive.google.com/drive/folders/1NC-rsPLtX1z_bDRzIHiF67fGSOnFVmqC?usp=sharing
F & Q
1.No Signal with front view camera or with front view camer?
This may be because the front view wasn't installed, it's disabled in the settings, or the front view camera isn't properly connected
If you haven’t installed the front view camera, please turn off the front view display in the settings.
How front view camera works: When the gear is in "D" and the speed is below 20 km/h, the front view camera will activate automatically.
Note:
-
To keep the front view camera on at all times, press and hold the right scroll wheel inward for about 4 seconds.
-
To disable the front view camera (when it is set to stay on), press the right scroll wheel to the left once.
Example
1) .If the front view camera is not installed, a 'No Signal' message appear when the gear is shifted into 'D"
Solution: Turn off the Front View Camera option in the settings
2) If the front view camera is installed but shows 'No Signal' when shifting into 'D', the camera may not be connected properly. Solution: Check front view camera connection
2.Why my display is dark display and dark screen?
Answer: Normally, this is because that you upgraded with other company or other product software. if your displayer still can display, Congratulations that your screen still can be upgraded. If your screen is darked from begain, sorry to tell you that the screen already damaged ! you could upgrade software from the follow link if your display still power on
Software download: https://drive.google.com/file/d/1pwHNTktIBNUncxdZg9qAkNXfLW_pv4f6/view?usp=sharing
Upgrade Process:
- Download the software , Unzip the file
- Prepare a TF Card 8-16G, Format the TF card
- Copy "Update" file only into TF card, connect with Type C connector, Insert the TYPE C connector into the screen
- Screen will be upgraded automatically, Remove the TF Card when reach to 19%, screen will be upgraded continuely until it is restart.
- Done
Notice: Please make sure each process correct !
Contact: Support@satonic-autoparts.com
