本記事では、SATONIC 8.66 スクリーンが Android 画面または Satonic ロゴ画面でフリーズした場合のアップグレード方法をご紹介します。アップグレード手順を正しく実行し、確実にアップデートを完了させてください。
Notice:
1）2種類のソフトウェアを使って、画面を2回アップグレードする必要があります。
2）TFカードを1枚用意します。容量は8G〜16Gとし、フォーマットしてください。
3）最初のアップグレードが正常に完了したら、TFカードから「ATCUPG」ソフトウェアを削除し、「AutoUpdate」だけをTFカードにコピーしてください。
アップグレード1. 画面をアクティブにする：
「ATCUPG」というソフトウェアをダウンロードして画面をアクティベートする必要があります。以下のソフトウェアリンクとアップグレード動画を確認してください。
ソフトウェアダウンロードリンク：
https://drive.google.com/drive/folders/1hp4cEpUbX8-Md0xQcgjUW35-oLyS5gsR?usp=sharing
アップグレード手順：https://youtu.be/-M_rRATAkD8
注意: スマートピンを使用して「リセット」スロットを一度押し、スクリーンが暗くなりリセットされます。その後、5本の指でスクリーンをスライドさせてデータ表示が見えるまで待ち、スクリーンのアップグレードを待ちます（車をロックしたり、テスラの電源を切ったりしないでください）。成功すると、以下のようなインターフェースが表示され、スクリーンがアクティブ化されます。次のソフトウェアアップグレードを進めることができます。
2.最新バージョンへアップグレード 「AutoUpdate」 ソフトウェア：
ソフトウェアダウンロードリンク：
https://drive.google.com/drive/folders/14or-k-MSgAAWf_A-I6QsiUldTMqr6oqj?usp=sharing
Upgrade process:
1. 8〜16GB の TF カードを使用し、TF カードをフォーマットします。
2. ソフトウェアファイル「AutoUpdate」を TF カードにコピーします。
3. TF カードを Type-C ポートに挿入すると自動的にアップグレードが始まります。アップグレード中は電源を切ったり、TF カードを抜かないでください。
4. アップグレード完了後、スクリーンが再起動します。
5. Exit を押してから TF カードを取り外してください。
ご不明な点がありましたら、support@satonic-autoparts.comまでメールでお問い合わせください。
Hey, I had followed this process before and it worked and was abke to successfully update my unit. After about 10 months I noticed I had a boot menu appear that I couldn’t get out of. It was stuck in a loop and it would not fully boot. I contacted Satonic support and they recommended it performance the same procedure. I tried and tried, as you all have and I just couldn’t get it to work. After some frustration, I took a break from it and decided to try it again today. It worked, and I found out what I had been doing wrong. The 5 finger thing is real but its all about the timing to get it to work. Here’s my suggestion, and just tried it for a third time to make sure it worked before sending this out. Here is what I did.
1. Insert usb drive with the ACTUG folder and its contents in the root directory into the left usb port on the Satonic 866 Pro.
2. Reset the system with a paper clip. As soon as you press the reset button, with one hand, using all five fingers, slowly slide all five fingers from right side of screen to left until you some data pop up on the screen. This worked for me for the third time but it was the timing that made the difference. I then performed the second part to update the touchscreen as they suggested. Like brand new again. Wishni could post pics.
Support from these guys is horrendous. Apart from trying to palm me off and saying that I didn’t purchase from them (which I did) so they can’t support me, they just stopped replying to me when this process would not work. I will never buy another one of their products.
Despite the lack of support. I got this process to work. The instructions above are not great, but maybe this might help some of you.
First, when you download the file from the link on the Google drive, Google zips up the file, but it splits it into two zip files. One will be a little over 1GB and the other will be about 789MB. You need to unzip both files and put the extracted files into one directory called “ATCUPG”. In total, there should be 29 items in this folder. Copy the folder on to a freshly formatted USB drive. I formatted mine with FAT32.
Note: I initially tried this process with several USB drives I had at home, but they were all USB-A drives so I had to use an adaptor to convert to USB-C to plug in to the unit. I even tried it with multiple adaptors. It failed every time. I ended up buying a SanDisk drive with a native USB-C connector and this worked. So if you’re having issues at this point, you might want to give it a try.
For the second step, there is only one zip file that downloads. Just extract this and follow the process of formatting the USB drive and copy the folder and it’s contents to the flash drive. Once you plug it in, if the first part was successful and you’re seeing the screen shown above with the icons along the bottom, then it will detect the upgrade file and start automatically. Once this process completes, it should be good to go again.
Hope that works for you.
not working, doesn’t load logo of car and says fastboot mode
it won’t work, after press the reset, the screen can no longer control the aircon and seats.
the company has not replied to me with any solution yet.
Be carful, this process totally broke mine… it doesn’t get turned on…😱