이 글에서는 SATONIC 8.66 스크린이 안드로이드 인터페이스나 Satonic 로고 화면에서 멈춰 있을 때 업그레이드하는 방법을 소개합니다. 업그레이드 과정이 올바르게 진행되었는지, 정상적으로 완료되었는지 반드시 확인해 주세요.
Notice:
1) 두 가지 소프트웨어로 화면을 두 번 업그레이드해야 합니다.
2) 8G에서 16G 용량의 TF 카드를 준비한 뒤, 포맷해 줍니다.
3) 첫 번째 업그레이드를 성공적으로 마친 후, TF 카드에서 "ATCUPG" 소프트웨어를 삭제하고, "AutoUpdate"만 TF 카드에 복사해 넣으세요.
업그레이드 1. 화면 활성화:
"ATCUPG" 소프트웨어를 다운로드해 화면을 활성화해야 합니다. 아래 제공된 소프트웨어 링크와 업그레이드 영상을 참고해 주세요.
소프트웨어 다운로드 링크:
https://drive.google.com/drive/folders/1hp4cEpUbX8-Md0xQcgjUW35-oLyS5gsR?usp=sharing
업그레이드 절차:https://youtu.be/-M_rRATAkD8
주의: 스마트 핀을 사용해 "Reset" 슬롯을 한 번 눌러 스크린을 꺼서 리셋한 뒤, 다섯 손가락으로 스크린을 쓸어 넘기면 데이터 화면이 표시됩니다. 이후 스크린 업그레이드가 완료될 때까지 기다려 주세요(이때 차량 잠금 또는 전원 OFF는 금지). 약 15–20분 정도 소요되며, 완료 후 아래와 같은 인터페이스가 나타나면 스크린이 활성화되었다는 의미입니다. 이후 다음 소프트웨어 업그레이드를 진행하시면 됩니다.
2.최신 버전으로 업그레이드 "AutoUpdate" software:
소프트웨어 다운로드 링크:
https://drive.google.com/drive/folders/14or-k-MSgAAWf_A-I6QsiUldTMqr6oqj?usp=sharing
Upgrade process:
1. 8–16G 용량의 TF 카드를 사용하고, TF 카드를 포맷합니다.
2. 소프트웨어 파일 "AutoUpdate"를 TF 카드에 복사합니다.
3. TF 카드를 타입 C 포트에 삽입하면 자동으로 업그레이드가 시작됩니다. 업그레이드 중에는 전원을 끄거나 TF 카드를 제거하지 마세요.
4. 업그레이드가 완료되면 스크린이 자동으로 재부팅됩니다.
5. 재부팅 후 Exit(종료)를 누르고 TF 카드를 제거합니다.
문의 사항이 있으시면 support@satonic-autoparts.com으로 이메일을 보내 주세요.
Hey, I had followed this process before and it worked and was abke to successfully update my unit. After about 10 months I noticed I had a boot menu appear that I couldn’t get out of. It was stuck in a loop and it would not fully boot. I contacted Satonic support and they recommended it performance the same procedure. I tried and tried, as you all have and I just couldn’t get it to work. After some frustration, I took a break from it and decided to try it again today. It worked, and I found out what I had been doing wrong. The 5 finger thing is real but its all about the timing to get it to work. Here’s my suggestion, and just tried it for a third time to make sure it worked before sending this out. Here is what I did.
1. Insert usb drive with the ACTUG folder and its contents in the root directory into the left usb port on the Satonic 866 Pro.
2. Reset the system with a paper clip. As soon as you press the reset button, with one hand, using all five fingers, slowly slide all five fingers from right side of screen to left until you some data pop up on the screen. This worked for me for the third time but it was the timing that made the difference. I then performed the second part to update the touchscreen as they suggested. Like brand new again. Wishni could post pics.
Support from these guys is horrendous. Apart from trying to palm me off and saying that I didn’t purchase from them (which I did) so they can’t support me, they just stopped replying to me when this process would not work. I will never buy another one of their products.
Despite the lack of support. I got this process to work. The instructions above are not great, but maybe this might help some of you.
First, when you download the file from the link on the Google drive, Google zips up the file, but it splits it into two zip files. One will be a little over 1GB and the other will be about 789MB. You need to unzip both files and put the extracted files into one directory called “ATCUPG”. In total, there should be 29 items in this folder. Copy the folder on to a freshly formatted USB drive. I formatted mine with FAT32.
Note: I initially tried this process with several USB drives I had at home, but they were all USB-A drives so I had to use an adaptor to convert to USB-C to plug in to the unit. I even tried it with multiple adaptors. It failed every time. I ended up buying a SanDisk drive with a native USB-C connector and this worked. So if you’re having issues at this point, you might want to give it a try.
For the second step, there is only one zip file that downloads. Just extract this and follow the process of formatting the USB drive and copy the folder and it’s contents to the flash drive. Once you plug it in, if the first part was successful and you’re seeing the screen shown above with the icons along the bottom, then it will detect the upgrade file and start automatically. Once this process completes, it should be good to go again.
Hope that works for you.
not working, doesn’t load logo of car and says fastboot mode
it won’t work, after press the reset, the screen can no longer control the aircon and seats.
the company has not replied to me with any solution yet.
Be carful, this process totally broke mine… it doesn’t get turned on…😱